Last updated: 23/11/2020      2 stocks left

KINGSTON 4GB 1600MHZ DDR3 NON-ECC CL11 DIMM 1.35V

This document describes ValueRAM's 512M x 64-bit (4GB)
DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low
voltage, memory module, based on eight 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
240-pin DIMM uses gold contact fingers.

FEATURES:


• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height: 0.740” (18.75mm) or 1.180” (30.00mm)

Specs:

CL(IDD): 11 cycles
Row Cycle Time (tRCmin): 48.125ns (min.)
Refresh to Active/Refresh: 260ns (min.)
Row Active Time (tRASmin): 35ns (min.)
Maximum Operating Power: (1.35V) = TBD W*
UL Rating: 94 V - 0
Operating Temperature: 0 oC to 85 oC
Storage Temperature: -55 oC to +100 oC

KINGSTON 4GB 1600MHZ DDR3 NON-ECC CL11 DIMM 1.35V

$66.00Price

    Available both online 

    and in our physical store

    Address: 230 Commerce Street, Kaitaia 0410

    Open from Mondays to Fridays, 9:00AM - 5:00PM

    Closed on Public Holidays

    CONNECT

    CONTACT

    • Facebook
    • Instagram

    © 2021 by Laurenson Technology Limited

    GST Number: 97-968-306

    NZBN: 9429033109626